ecoexist store

Idle power control – phase 2 complete

Posted by admin on Nov 18th, 2008
2008
Nov 18

So phase 2 of the idle power consumption testing is complete, and with some surprising results. It seems that the X10 appliance module didn’t consume hardly any electricity going by the Kill-a-watt numbers. Unfortunately the time measurements aren’t exactly the same, but they are close enough to get a fairly conclusive result.


phase 1 test results (XBox plugged into an outlet):
Test hours = 172
kW used = 0.30

phase 2 results (XBox plugged into an X10 module):
Test hours = 168
kW used = 0.30


If I had let the test run another 4.5 hours to mimic the phase 1 test then it *might* have added another 0.01 or 0.02 kW maximum. So the overall consumption of the X10 module is actually, and surprisingly, negligible.


Phase 3 will involve the XBox plugged into the X10 module, and the module will be turned off for several hours a day to see how much electricity is actually conserved. It is starting to look like it will be more than I initially expected, at least going by the phase 2 results.

2 Responses

  1. Eric Says:

    I am interested in knowing the results of Phase 3. Could you please let me know what they were. I am extremely interested in reducing my power consumpti0n and considering using the X-10. Thanks!

  2. admin Says:

    I had forgotten about phase 3 – I’ll get some testing done over the next week or two and let you know! Thanks for posting a comment.

Leave a Comment




XHTML: You can use these tags: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

Please note: Comment moderation is enabled and may delay your comment. There is no need to resubmit your comment.